| Model |
DSC-100 |
| Control calculation method |
Microcomputer, 10-bit resolution |
| Input signal |
4 to 20 mADC (input impedance 50 Ω) |
| Feedback resistance |
100 Ω to 2 KΩ |
| Sampling cycle |
0.1 sec. |
| Measurement accuracy |
± 0.2 of input span |
| Setting range |
| Opening setting range: |
0.0 to 100.0% |
| Dead band: |
0.1 to 20.0% |
| Hysteresis: |
0.1 to 20.0% |
| Output limitter (high): |
0.0 to 100.0% |
| Output limitter (low): |
0.0 to 100.0% |
| Output gain adjustment: |
0.0 to 200.0% |
| Output shift adjustment: |
±30% |
|
| Display method |
7-segment LED (red), character height 15 mm, 4 digits
7-segment LED (red), character height 8 mm, 1 digit
Indicator LED display |
| Control output |
ON/OFF control by SSR drive
200 VAC, 2 A (resistive load) |
| Automatic operation output |
Auto mode only
No-voltage a contact, 250 VAC, 1 A max. (resistive load) |
| Controller error output |
No-voltage a contact, 250 VAC, 1 A max. (resistive load) |
| Self-diagnostics function |
RAM check, CPU power monitor, watchdog timer, etc. |
| Power interruption measure |
Parameters saved by EPROM |
| Power source |
85 to 264 VAC wide power source range (50/60 Hz) |
| Power consumption |
Approx. 12 VA |
| Insulation resistance |
Across measurement terminal and ground terminal 500 VDC, 20 MΩ or more
Across power terminal and ground terminal 500 VDC, 20 MΩ or more |
| Dielectric strength |
Across measurement terminal and ground terminal 1000 VDC, for one minute
Across power terminal and ground terminal 1500 VDC, for one minute |
| Operating temperature/humidity |
-10 to 55 ºC, 90%RH or less (no condensation) |
| Optional specification |
Opening output signal 4 to 20 mADC insulation type (load resistance 500Ω) |
